Autel MaxiSYS Lineup Explained: MS906 Pro vs MS909 vs MS919 vs Ultra

If you run an independent shop, sooner or later you’ll look at Autel’s MaxiSYS tablets. The names are close, the photos look alike, and the price gap between the entry model and the flagship is large. This guide breaks the lineup into tiers so you can see what each step up actually adds.
Specifications below come from Autel’s official product information as summarized on our product pages. Always confirm vehicle coverage and software update terms for your specific needs.
Tier 1: MaxiSYS MS906 Pro — Coding Without the Extras
The MS906 Pro is the entry point to the MaxiSYS family. Autel lists an 8-inch 1920 x 1200 display, 4 GB of RAM, 128 GB of storage, an 11,600 mAh battery, and the V200 wireless VCI.
What you get: all-system diagnostics, bidirectional tests, a full service menu, ECU coding on supported makes, and support for DoIP and CAN FD vehicles.
What you don’t get: online programming for some brands and topology mapping, both of which are reserved for higher tiers.
Best for: general repair shops that need dependable coding and active tests but don’t do much module programming.
Tier 2: MS908S Pro II and Elite II Pro — Adding Programming
These two 9.7-inch tablets add a MaxiFlash interface with J2534 pass-through capability, which opens the door to ECU programming on supported vehicles.
- The MS908S Pro II is listed with Android 10, a Qualcomm 660 processor, 4 GB of RAM, 128 GB of storage, an 11,000 mAh battery, and a MaxiFlash Elite J2534 interface.
- The Elite II Pro shares a similar 9.7-inch, 4 GB / 128 GB platform and highlights online programming on supported vehicles, including Mercedes-Benz and BMW applications listed by Autel.
Best for: shops that program modules after replacement or need more flexibility with European makes.
Tier 3: MS909 and MS909 S2 — Topology Mapping
The MS909 is listed with a 9.7-inch display, 4 GB of RAM, 128 GB of storage, a 15,000 mAh battery, and a wireless MaxiFlash VCI. Its signature feature is topology mapping: a visual map of every module on the vehicle network, color-coded by status.
Why that matters: on a modern vehicle with dozens of modules, seeing at a glance which ones aren’t communicating can save a lot of time on network faults.
The MS909 S2 is the newer generation in the 909 family, positioned by Autel for topology analysis, ECU coding, and J2534 pass-through work.
Best for: shops dealing with network and communication faults, or anyone who wants to work faster on late-model vehicles.
Tier 4: MS919 — Adding the VCMI
The MS919 keeps the 9.7-inch form factor but swaps the VCI for the five-in-one MaxiFlash VCMI. That interface combines vehicle communication with a four-channel oscilloscope, waveform generator, multimeter, and network testing.
Why that matters: a scan tool tells you a sensor circuit has a fault. A scope shows you the actual signal, so you can tell a bad sensor from a wiring problem. Having it in the same kit as the scan tool means less switching between tools.
Best for: diagnostic-focused shops that want scope capability without moving to the larger Ultra tablet.
Tier 5: MaxiSYS Ultra and Ultra S2 — The Flagships
The original MaxiSYS Ultra pairs a 12.9-inch-class tablet with 4 GB of RAM, 256 GB of storage, an 18,000 mAh battery, a docking station, and the VCMI.
The Ultra S2 is Autel’s current flagship, with a 13.7-inch 2176 x 1600 anti-glare display, Android 13, a Qualcomm QCS6490 processor, the six-in-one MaxiFlash VCMI2, and Topology 3.0 module mapping.
There’s also the MaxiCOM Ultra Lite, which gives you the large 12.7-inch screen and topology mapping with a wireless VCI instead of the VCMI.
Best for: high-volume and diagnostic specialty shops that want the biggest screen, the fastest hardware, and the full instrument suite in one kit.
What About EVs?
If electric and hybrid service is on your roadmap, Autel offers EV versions such as the MS909 EV and Ultra EV, which add the EVDiag box for high-voltage battery pack analysis. We cover them in our EV diagnostics guide.
How to Pick a Tier
Ask these questions in order:
- Do you need coding? If yes, MS906 Pro is the minimum.
- Do you need programming? Look at the MS908S Pro II or Elite II Pro and up.
- Do you chase network faults often? Topology mapping on the MS909 family is worth it.
- Do you use a scope? The VCMI on the MS919 or Ultra makes sense.
- Do you want the biggest screen and newest hardware? That’s the Ultra S2.
Don’t forget to budget for software updates, which keep coverage current as new models arrive.
The Bottom Line
Each MaxiSYS tier adds one big capability: coding, then programming, then topology, then an integrated scope, then flagship hardware. Buy the tier that matches the work your shop does most, and you won’t pay for features that sit unused. Browse the full lineup in our diagnostic tools category.





