{"id":100355,"date":"2026-11-16T01:52:57","date_gmt":"2026-11-16T01:52:57","guid":{"rendered":"https:\/\/toplse.com\/?p=100355"},"modified":"2026-11-16T05:45:40","modified_gmt":"2026-11-16T05:45:40","slug":"abs-brake-bleed-bidirectional-scan-tool","status":"publish","type":"post","link":"https:\/\/toplse.com\/fr_fr\/abs-brake-bleed-bidirectional-scan-tool\/","title":{"rendered":"How to Perform an ABS Brake Bleed with a Bidirectional Scan Tool"},"content":{"rendered":"<figure class=\"wp-block-image size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1280\" height=\"720\" src=\"https:\/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool.jpg\" alt=\"How to Perform an ABS Brake Bleed with a Bidirectional Scan Tool\" class=\"wp-image-100339\" srcset=\"\/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool.jpg 1280w, \/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool-300x169.jpg 300w, \/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool-1024x576.jpg 1024w, \/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool-768x432.jpg 768w, \/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool-18x10.jpg 18w, \/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool-600x338.jpg 600w, \/\/toplse.com\/wp-content\/uploads\/2026\/11\/07-abs-brake-bleed-bidirectional-scan-tool-150x84.jpg 150w\" sizes=\"(max-width: 1280px) 100vw, 1280px\" \/><\/figure>\n<p>A conventional gravity or two-person pedal bleed will move fluid through the calipers, but it will not always move air out of an ABS hydraulic control unit. That module contains valves and a pump that can trap air after you replace the HCU, open the hydraulic system, or finish a caliper and hose job that still leaves a soft pedal. An ABS brake bleed with a bidirectional scan tool is the procedure that commands those valves and the pump to cycle while you bleed the brakes, which is what many OEM service manuals now require.<\/p>\n<p>This is not a reason to hook up a tablet for every pad replacement. It is the right next step when the hydraulic system was opened at the ABS unit, when the pedal stays soft after a correct conventional bleed, or when the manufacturer\u2019s procedure says to run an automated bleed.<\/p>\n<h2>Why the ABS module needs to be part of the bleed<\/h2>\n<p>The hydraulic control unit sits between the master cylinder and the wheels. During stability or ABS events it can isolate, dump, or apply pressure with solenoids and a high-pressure pump. Those internal passages do not see a full flow of fluid during a simple pedal bleed. Air that enters when you replace the module, a brake line at the HCU, a master cylinder, or, on some vehicles, a caliper or hose, can stay there.<\/p>\n<p>The result is a pedal that still sinks or feels spongy, a warning lamp, or a complaint that the brakes are fine in the bay and poor on the first hard stop. Cycling the pump and valves with a <a href=\"https:\/\/toplse.com\/what-is-a-bi-directional-scan-tool\/\">bidirectional scan tool<\/a> moves fluid through those passages while you open the bleeders in the published order.<\/p>\n<p>This function lives with the other <a href=\"https:\/\/toplse.com\/scan-tool-service-functions-explained\/\">service routines<\/a> on a capable scanner. A generic OBD2 code reader cannot run it. You need ABS coverage and bidirectional control, which is why an ABS-capable service tool such as the <a href=\"https:\/\/toplse.com\/product\/foxwell-nt630-plus-abs-srs-and-service-scanner\/\">Foxwell NT630 Plus<\/a>, or a bidirectional tablet such as the <a href=\"https:\/\/toplse.com\/product\/autel-maxicom-mk808bt-pro-bluetooth-diagnostic-tablet\/\">Autel MaxiCOM MK808BT Pro<\/a> ou <a href=\"https:\/\/toplse.com\/product\/foxwell-nt710-bidirectional-scan-tool\/\">Foxwell NT710<\/a>, belongs in a <a href=\"https:\/\/toplse.com\/starter-diagnostic-tool-kit-independent-shop\/\">starter shop kit<\/a> if you do brake work on late-model vehicles.<\/p>\n<h2>When to use a scan-tool bleed<\/h2>\n<p>Use the OEM automated or scan-tool bleed when:<\/p>\n<ul>\n<li>The ABS hydraulic unit, a line at the HCU, or the master cylinder was replaced or opened.<\/li>\n<li>A conventional bleed is complete, the fluid is clean, and the pedal is still soft.<\/li>\n<li>Service information requires an ABS bleed after opening the system, even if the pedal already feels reasonable.<\/li>\n<li>You replaced a component on a vehicle that also has an electronic parking brake, and the procedure ties EPB service mode to the hydraulic work. In that case, complete the <a href=\"https:\/\/toplse.com\/electronic-parking-brake-epb-service-scan-tool\/\">EPB service<\/a> steps rather than forcing a motor-on-caliper piston.<\/li>\n<\/ul>\n<p>If you only replaced front pads on a vehicle with a conventional hydraulic parking brake, and the system was never opened at the HCU, a careful conventional bleed or a good pressure bleeder may be enough. Follow the service information, not a habit.<\/p>\n<h2>Setup and safety before you command the pump<\/h2>\n<p>Support the vehicle properly, and do not rely on a jack alone if a wheel is off. Use the exact DOT fluid specified for that vehicle, and do not mix fluid types. Keep the reservoir topped up for the entire procedure so you do not pull air in at the master cylinder. Have clear hoses and catch bottles ready at the bleeders the procedure names.<\/p>\n<p>The ABS pump draws noticeable current. Confirm the battery is healthy, and use a maintainer if the service information asks for one. A weak battery can abort the routine, set communication codes, or leave the pump mid-cycle. Keep the ignition in the required state, usually key on, and make sure the tool stays connected.<\/p>\n<p>On Chrysler, Dodge, Jeep, and Ram products with a secure gateway, you may need <a href=\"https:\/\/toplse.com\/fca-secure-gateway-autoauth-chrysler-dodge-jeep-ram\/\">Authentification automatique<\/a> before the ABS module will accept the bleed command. If the tool cannot enter the ABS menu, fix communication first, not the pedal.<\/p>\n<p>Read ABS and related brake codes before you start. A wheel-speed sensor code or a pump-motor fault will not vanish because you bled the calipers, and some routines will refuse to run when those codes are present. If a lamp is on, our <a href=\"https:\/\/toplse.com\/abs-airbag-srs-light-on-scanner-guide\/\">ABS and SRS light guide<\/a> is the right companion article.<\/p>\n<h2>How the bidirectional bleed typically runs<\/h2>\n<p>There is no universal bleeder order that is safe to invent. The manufacturer specifies the sequence, the number of pump cycles, and whether you start at the wheel farthest from the master cylinder or at a different corner first. Open the service information and follow it.<\/p>\n<p>In general, the tool will ask you to attach a hose, open a stated bleeder, then command a pump or valve cycle. You watch for air and old fluid, close the bleeder when the tool prompts you, and move to the next corner. A pressure bleeder on the reservoir can help keep the master cylinder supplied, but it does not replace the scan-tool portion on vehicles that require it.<\/p>\n<p>Do not let the pump run dry, and do not hold a bleeder open after the tool has finished that step. If the routine aborts, close all bleeders, refill the reservoir, and check voltage and communication before you restart it. Never drive the vehicle to \u201cfinish the bleed\u201d with a soft pedal.<\/p>\n<h2>Confirm the pedal, the lamps, and a careful test<\/h2>\n<p>When the procedure reports complete, pump the pedal with the engine running and with it off, and confirm a firm, consistent feel. Recheck the reservoir, inspect every bleeder and line you opened, and look at the ABS, brake, and ESC lamps. Clear only the codes that were created by the service, then rescan. A pump-motor, solenoid, or communication code that remains is a new problem, not a leftover bubble.<\/p>\n<p>Do a cautious road test in a safe area: a slow stop first, then a firmer stop, and only then any stability-system check the OEM procedure requires. If the pedal fades, the lamp returns, or the vehicle pulls, stop and recheck the hydraulic system. Air you did not get, a leak, or a failed HCU will still be there.<\/p>\n<p>An ABS brake bleed is a controlled service function, not a workaround. Use a bidirectional scan tool when the hydraulic unit or the OEM procedure requires it, keep the fluid and the voltage where they belong, and do not release the vehicle until the pedal is firm and the lamps are out.<\/p>\n<p class=\"toplse-related-tools\"><strong>Related tools:<\/strong> <a href=\"https:\/\/toplse.com\/product\/kingbolen-s6-pro-bi-directional-scan-tool\/\">KINGBOLEN S6 Pro bi-directional scan tool<\/a>.<\/p>","protected":false},"excerpt":{"rendered":"<p>A conventional gravity or two-person pedal bleed will move fluid through the calipers, but it will not always move air out of an ABS hydraulic control unit. That module contains valves and a pump that can trap air after you replace the HCU, open the hydraulic system, or finish a caliper and hose job that still leaves a soft pedal. An ABS brake bleed with a bidirectional scan tool is the procedure that commands those valves and the pump to cycle while you bleed the brakes, which is what many OEM service manuals now require. This is not a reason to hook up a tablet for every pad replacement. It is the right next step when the hydraulic system was opened at the ABS unit, when the pedal stays soft after a correct conventional bleed, or when the manufacturer\u2019s procedure says to run an automated bleed. Why the ABS module needs to be part of the bleed The hydraulic control unit sits between the master cylinder and the wheels. During stability or ABS events it can isolate, dump, or apply pressure with solenoids and a high-pressure pump. Those internal passages do not see a full flow of fluid during a simple pedal bleed. Air that enters when you replace the module, a brake line at the HCU, a master cylinder, or, on some vehicles, a caliper or hose, can stay there. The result is a pedal that still sinks or feels spongy, a warning lamp, or a complaint that the brakes are fine in the bay and poor on the first hard stop. Cycling the pump and valves with a bidirectional scan tool moves fluid through those passages while you open the bleeders in the published order. This function lives with the other service routines on a capable scanner. A generic OBD2 code reader cannot run it. You need ABS coverage and bidirectional control, which is why an ABS-capable service tool such as the Foxwell NT630 Plus, or a bidirectional tablet such as the Autel MaxiCOM MK808BT Pro or Foxwell NT710, belongs in a starter shop kit if you do brake work on late-model vehicles. When to use a scan-tool bleed Use the OEM automated or scan-tool bleed when: The ABS hydraulic unit, a line at the HCU, or the master cylinder was replaced or opened. A conventional bleed is complete, the fluid is clean, and the pedal is still soft. Service information requires an ABS bleed after opening the system, even if the pedal already feels reasonable. You replaced a component on a vehicle that also has an electronic parking brake, and the procedure ties EPB service mode to the hydraulic work. In that case, complete the EPB service steps rather than forcing a motor-on-caliper piston. If you only replaced front pads on a vehicle with a conventional hydraulic parking brake, and the system was never opened at the HCU, a careful conventional bleed or a good pressure bleeder may be enough. Follow the service information, not a habit. Setup and safety before you command the pump Support the vehicle properly, and do not rely on a jack alone if a wheel is off. Use the exact DOT fluid specified for that vehicle, and do not mix fluid types. Keep the reservoir topped up for the entire procedure so you do not pull air in at the master cylinder. Have clear hoses and catch bottles ready at the bleeders the procedure names. The ABS pump draws noticeable current. Confirm the battery is healthy, and use a maintainer if the service information asks for one. A weak battery can abort the routine, set communication codes, or leave the pump mid-cycle. Keep the ignition in the required state, usually key on, and make sure the tool stays connected. On Chrysler, Dodge, Jeep, and Ram products with a secure gateway, you may need AutoAuth before the ABS module will accept the bleed command. If the tool cannot enter the ABS menu, fix communication first, not the pedal. Read ABS and related brake codes before you start. A wheel-speed sensor code or a pump-motor fault will not vanish because you bled the calipers, and some routines will refuse to run when those codes are present. If a lamp is on, our ABS and SRS light guide is the right companion article. How the bidirectional bleed typically runs There is no universal bleeder order that is safe to invent. The manufacturer specifies the sequence, the number of pump cycles, and whether you start at the wheel farthest from the master cylinder or at a different corner first. Open the service information and follow it. In general, the tool will ask you to attach a hose, open a stated bleeder, then command a pump or valve cycle. You watch for air and old fluid, close the bleeder when the tool prompts you, and move to the next corner. A pressure bleeder on the reservoir can help keep the master cylinder supplied, but it does not replace the scan-tool portion on vehicles that require it. Do not let the pump run dry, and do not hold a bleeder open after the tool has finished that step. If the routine aborts, close all bleeders, refill the reservoir, and check voltage and communication before you restart it. Never drive the vehicle to \u201cfinish the bleed\u201d with a soft pedal. Confirm the pedal, the lamps, and a careful test When the procedure reports complete, pump the pedal with the engine running and with it off, and confirm a firm, consistent feel. Recheck the reservoir, inspect every bleeder and line you opened, and look at the ABS, brake, and ESC lamps. Clear only the codes that were created by the service, then rescan. A pump-motor, solenoid, or communication code that remains is a new problem, not a leftover bubble. Do a cautious road test in a safe area: a slow stop first, then a firmer stop, and only then any stability-system check the OEM procedure requires. If the pedal [&hellip;]<\/p>","protected":false},"author":1,"featured_media":100339,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-100355","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"_links":{"self":[{"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/posts\/100355","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/comments?post=100355"}],"version-history":[{"count":2,"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/posts\/100355\/revisions"}],"predecessor-version":[{"id":100392,"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/posts\/100355\/revisions\/100392"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/media\/100339"}],"wp:attachment":[{"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/media?parent=100355"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/categories?post=100355"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/toplse.com\/fr_fr\/wp-json\/wp\/v2\/tags?post=100355"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}